详细说明：  
DYNASOLVE CU-7 树脂溶解剂，电子溶解剂

Dynasolve CU-7 is a safer solvent used for removing polyimide coatings.                  It is used extensively in the fiber

optics industry.

General

Dynasolve CU-7 is a high flash point, proprietary solvent system designed to remove polyimide coatings from

various substrates.  The product is a non-chlorinated, non-carcinogenic, non-ozone depleting solvent.

Dynasolve CU-7 can be used for extended periods without decomposition.

Applications

1. Removal of polyimide coatings from fiber optics.

2.  Removal of polyimide coatings from semiconductor wafers.

3.  Removal of polyimide coatings from advanced composites and various metals.

Specifications

Color:                   Water white

Specific Gravity:        1.03

Boiling Point:           >392oF

Flash Point:             204°F (Lowest flashing component)

Directions For Use

1. Immerse material with polyimide coating into a glass or metal container, preferably stainless steel.

2.  Heat for 10 minutes – 2 hours at 180-380oF.           Polyimide films can differ greatly in both composition and

    degree of curing and therefore a very broad parameter recommendation is required.

3.  Use of ultrasonic cleaners or mechanical mixing of the solvent will speed up the removal rate.

4.  The solvent works by breaking the bond between the polyimide and the substrate permitting removal of the

    polyimide as a film.

5.  Rinse substrate with alcohol or water and dry.

Caution and Warnings

Dynasolve CU-7 contains powerful organic solvents.               It is harmful if inhaled or swallowed.       Avoid breathing

vapors or mist.     Keep away from heat and flame.          Avoid contact with eyes and skin.  Wear gloves, safety

goggles, and protective clothing when handling.  Use with adequate ventilation.  Refer to MSDS before use, for

disposal, or additional safe handling.