VOLTAGE: 90 ~ 264 VAC FULL RANGE FREQUENCY : 60~50 HZ INPUT CURRENT: 6.0 A ( RMS ) FOR 110VAC 3.0 A ( RMS ) FOR 220VAC INRUSH CURRENT: 60.0A MAX. FOR 110 VAC 80.0A MAX. FOR 220 VAC
Output Voltage
Output Current Min.
Output Current Max.
Output Current Peak
Regulation Load
Regulation Line
Output Ripple & Noise Max.[P-P]
5V
3
25.00
± 5%
± 1%
50mV
12V
2
16
± 8%
± 1%
100mV
-5V
0.05
0.5
±10%
± 1%
120mV
-12V
0.05
1
±10%
± 1%
150mV
3.3V
1
14
± 5%
± 1%
50mV
+5VSB
0.1
1.5
± 5%
± 1%
50mV
REMARKS: 1. THE OUTPUT POWER OF 5V & 3.3V NOT EXCEED 138 WATTS 2. THE OUTPUT POWER OF 5V, 3.3V AND 12V NOT EXCEED 278 W 3. TOTAL OUTPUT POWER NOT EXCEED 300 WATTS
*Active PFC (full range), MEET IEC-1000-3-2 CLASS D *12V Max. Current : 16A *TEMPERATURE RANGE: OPERATING 0℃ ~ 40℃ * HUMIDITY:OPERATING:20%-95%, NON-OPERATING:10%-95% * REMARKS:85% IS NORMAL CONDITION AND 95% IS WITH SPECIAL COATING PROCESS *EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B *OVER POWER PROTECTION *OVER VOLTAGE PROTECTION *OVER CURRENT PROTECTOIN *SHORT CIRCUIT PROTECTOIN *SAFETY: UL, CSA, TUV, CCC, GOST *Cooling: Dual 40 mm DC Fans *3.3V /5V Remote sensing *DC wires output from left side ( optional ) *Serial ATA optional
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS
