HB-YD988(Q)高铬耐磨焊丝
HB-YD988(Q)高铬耐磨焊丝
产品价格:¥1(人民币)
  • 规格:完善
  • 发货地:邢台
  • 品牌:
  • 最小起订量:1公斤
  • 免费会员
    会员级别:试用会员
    认证类型:未认证
    企业证件:未通过
    认证信息:未认证

    商铺名称:华北航海特种焊接材料有限公司

    联系人:张经理(先生)

    联系手机:

    固定电话:

    企业邮箱:huabeihtc@163.com

    联系地址:邢台桥东工业区158号

    邮编:55700

    联系我时,请说是在线缆网上看到的,谢谢!

    商品详情

      气体保护焊堆焊焊丝Gas Shielded Hardfacing Wires      

      牌号

      Trade Name

      直径

      Diameter

      HRC

      (国家标准台式硬度计)

      特点及主要用途

      characteristics and application

      HB-YD114(Q)

      1.6

      50-55

      (受强烈冲击后

      After high impact)

      高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。

      High-manganese steel hardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.

      HB-YD115(Q)

      1.6

      50-55

      (受强烈冲击后After high impact )

      用于受严重冲击高锰钢堆焊,加工硬化效果显著。

      Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening.

      HB-YD165(Q)

      1.6

      60-65

      高硬度耐磨焊丝,适用于磨粒磨损表面堆焊

      High hardness wear-resistant wire, it is used to abrasive wear surfacing welding.

      HB-YD172(Q)

      1.6

      ≥40

      用于堆焊齿轮、挖泥斗、矿山机械等磨损件

      Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery.

      HB-YD207(Q)

      1.6

      ≥50

      用于堆焊推土机刀片,螺旋桨等磨损零件

      Applied to repair surface of high wear parts, such as bulldozer blade and propeller.

      HB-YD212(Q)

      1.2/1.6

      ≥50

      用于堆焊各种受磨损的机件表面,如齿轮、挖斗、矿山机械

      Applied to repair surface of wear parts, such as gear mud bucket and mining machinery.

      HB-YD256(Q)

      1.6

      HB≥170

      高锰钢堆焊,适用于破碎机等受冲击磨损部位的堆焊

      High-manganese steel hardfacing flux-cored Wires, it is applied to repair surface of high impact wear parts, such as Crusher.

      HB-YD258(Q)

      1.6

      55-60

      用于耐磨表面堆焊

      Applied to repair surface of wear parts.

      HB-YD265(Q)

      1.6

      60-65

      高硬度耐磨焊丝,适用于磨粒磨损表面堆焊

      High hardness wear-resistant wire, it is used to abrasive wear surfacing welding.

      HB-YD322(Q)

      1.6

      55

      用于堆焊各种冲模及切削刃具,兼用于修复要求耐磨损性能较高之机械零件

      Applied to repair surface of high wear resistance parts, such as die and cutting cutlery.

      HB-YD327A(Q)

      1.6

      55

      专门用于模具堆焊,耐磨性能高于D322

      Used to mould surfacing, wear resistance is better than D322.

      HB-YD337(Q)

      1.6

      ≥48

      用于铸钢或锻钢上堆焊锻模

      Applied to repair forging die at cast steel or forging steel.

      HB-YD397(Q)

      1.6

      ≥40

      用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件

      Applied to repair hot forging die at cast steel or forging steel, or high strength wear surfacing.

      HB-YD405A(Q)

      1.6

      50-59

      用于热轧辊开坯辊堆焊

      Applied to repair hot-rolling blooming rollor.

      HB-YD430A(Q)

      1.6

      20-35

      打底层堆焊焊丝

      A backing hardfacing flux-cored Wires

      HB-YD488A(Q)

      1.6

      45-50

      用于轧辊堆焊

      Applied to repair rollor

      HB-YD507Mo(Q)

      1.6

      35-45

      用于510以下中高压阀门堆焊

      Applied to valve which operating temperature is less than 510.

      HB-YD518(Q)

      1.6

      40-50

      用于连铸辊堆焊

      Applied to repair continuous caster roller

      HB-YD688(Q)

      1.6

      50-60

      用于磨煤辊打底焊(韧性好,可以多层堆焊)

      Used to coal roller backing welding.

      HB-YD788(Q)

      1.6

      55-62

      硬度高,可以多层堆焊。

      High hardness and multi-layer welding

      HB-YD888(Q)

      1.2, 1.6

      60-65

      硬度高,堆焊层厚度不超过6mm

      High hardness, but the thickness of surfacing layer is less than 6mm.

      HB-YD888Ni(Q)

      1.2

      58-65

      高铬合金焊丝,用于耐磨表面堆焊

      Applied to repair surface of wear parts.

      HB-YD988(Q)

      1.6

      55-63

      高铬合金焊丝,用于耐磨表面堆焊

      Applied to repair surface of wear parts.

    在线询盘/留言
  • 0571-87774297