西门子 CPU416-3DP 6ES7 416-3XL04-0AB0模块控制器 

原装正品备件现货供应 

特价  西门子代理商供应 

上海斌勤电气技术有限公司

发布人：康奎 （销售经理）发布

本公司签约正式的销售合同，并开具13%的增-值-税-发-票。

外地客户统一采用快递发货,也支持上门提货，货物快递到您手时候,一定要开箱检验!如有损坏,请拒绝签收,并由快递公司返回!

在你签收后表示你对该货物没有异议!我们会给予您检测时间,并请在货物到给予确认,谢谢合作!

产品均为密封包装，外包装详见产品图片，白色标签上均有产品订货号和产地，各位买家在收到货后，请核对型号，无误后再拆包装、

本公司宗旨：本着以诚信为本，以顾客为中心.质量保证·服务诚信·价格实惠.

为用户提供专业的自动化产品及服务！

相关西门子产品技术：

SIMATIC S7-400，CPU 416-3 中央处理器，带： 内存 5.6 MB， （2.8 MB 代码，2.8 MB 数据）， 1.接口MPI/DP 12 MBit/s， 第 2 个 PROFIBUS DP 接口， 3.SS IFM 模块，可插拔。

6ES7416-2XP07-0AB0

SIMATIC S7-400，CPU 416-2, 中央处理器，带： 内存 8 MB， （4 MB 代码，4 MB 数据）， 1. 接口 MPI/DP 12 MBIT/S， 第 2 个 PROFIBUS DP 接口

显示价格

6ES7416-3ES07-0AB0

SIMATIC S7-400，CPU 416-3 PN/DP 中央处理器，带： 工作存储器 16 MB， （8 MB 代码，8 MB 数据）， 接口 第 1 个 MPI/DP 接口 12 MBIT/S(X1)， 第 2 个以太网/PROFINET 接口(X5) 第 3 个 IF 964-DP 接口可插拔(IF1)

显示价格

6ES7416-3XS07-0AB0

SIMATIC S7-400，CPU 416-3, 中央处理器，带： 工作存储器 16 MB， （8 MB 代码，8 MB 数据）， 1. 接口 MPI/DP 12 MBIT/S， 第 2 个 PROFIBUS DP 接口， 第 3 个 SS IFM 模块接口，可插拔

CPU 416

订货数据 附件 产品信息 组态工具

跳转到

概述

应用

设计

功能

技术规范

更多信息

概述

高端性能范围内的高性能 CPU

适用于对性能要求很高的工厂

CPU 416-3 PN/DP 中集成了 PROFINET 功能

应用

CPU 416-2, CPU 416-3 and CPU 416-3 PN/DP are powerful SIMATIC S7-400 CPUs.

The integrated PROFIBUS DP interfaces in the CPU 416-2 and CPU 416-3 make it possible to connect directly to the PROFIBUS DP fieldbus as a master or slave.

An additional DP master system can be connected to the CPU 416-3 and CPU 416-3 PN/DP using the IF 964-DP interface module.

The integrated PROFINET interface of the CPU 416-3 PN/DP includes switch functionality when the ERTEC 400-ASIC is used. This forms the basis for providing two externally accessible PROFINET ports. In addition to hierarchical network topologies, this also enables the creation of line structures in the new S7-400 controllers.

Note:

Only the 6ES7 964-2AA04-0AB0 interface submodule may be used.

设计

Both CPUs are equipped with the following:

Powerful processor:

The CPUs achieve instruction execution times as low as 0.03 μs per binary instruction.

CPU 416-2: 5.6 MB RAM (of which 2.8 MB each for program and data);

CPU 416-3: 11.2 MB RAM (of which 5.6 MB each for program and data);

CPU 416-3 PN/DP: 11.2 MB RAM (of which 5.6 MB each for program and data);

fast RAM for parts of the user program relevant to execution.

Flexible expansion:

Up to 262144 digital and 16384 analog inputs/outputs.

Multi-point interface MPI:

With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPUs can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.

Mode selector switch:

Designed as toggle switch.

Diagnostics buffer:

The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes. The number of entries can be parameterized.

Real-time clock:

The date and time are appended to diagnostic messages of the CPU.

Memory card:

For expansion of the integrated load memory. RAM and FEPROM cards (FEPROM for retentive storage) are available

Combined MPI/DP interface and integrated PROFIBUS DP interface (CPU 416-2 and CPU 416-3):

The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing and programming).

Mixed configuration: SIMATIC S5 and SIMATIC S7 as PROFIBUS master according to EN 50170.

CPU 416-3 and CPU 416-3 PN/DP also include:

A module slot:

An additional PROFIBUS DP master system can be connected via the IF 964-DP interface module.

CPU 416-3 PN/DP additionally includes:

PROFINET interface with 2 ports (switch):

PROFINET I/O, 256 IO devices connectable

PROFINET CBA