Housing 1, 2 & 3 Number Code
C–8–3 1/4” BSPP 02–160739 (A)2G
 3/8” BSPP 02–160740 (A)3G
 SAE 4 02–160741 (A)4H
 SAE 6 02–160742 (A)6H
C–10–3 1/4” BSPP 876705 (A)2G
 3/8” BSPP 876714 (A)3G
 SAE 6 876704 (A)6H
 SAE 8 876711 (A)8H
C–10–3S 1/4” BSPP 876707 (A)2G
 3/8” BSPP*** 876710 (A)3G
 SAE 6 876706 (A)6H
 SAE 8** 876712 (A)8H
C–12–3 1/2” BSPP 02–161817 (A)4G
 3/4” BSPP 02–161816 (A)6G
 SAE 10 02–160642 (A)10H
 SAE 12 02–160646 (A)12H
C–12–3S 1/2” BSPP* 02–178270 (A)4G
 3/4” BSPP* 02–178271 (A)6G
 SAE 10** 02–178268 (A)10H
 SAE 12** 02–178269 (A)12H
Notes
BSPP porting is designated by
‘‘G” in the model code SAE
porting is designated by either
“H” or “T’’ in the model code.
 Ports Part
Housing 1, 2 & 3 Number Code
C–16–3 1/2” BSPP 876720 (A)4G
 3/4” BSPP 876722 (A)6G
 SAE 10 876721 (A)10H
 SAE 12 876723 (A)12H
C–16–3S 1/2” BSPP 02–160676 (A)4G
 3/4” BSPP 876726 (A)6G
 SAE 10 876725 (A)10H
 SAE 12 876727 (A)12H
C–20–3 1/2” BSPP 876737 (A)4G
 3/4” BSPP*** 876738 (A)6G
 SAE 10 876757 (A)10H
 SAE 12 876739 (A)12H
C–20–3S 3/4” BSPP 876740 (A)6G
 1” BSPP 876742 (A)8G
 SAE 12 876741 (A)12H
 SAE 16 876743 (A)16H
* Port 3 = 3/8” BSPP
** Port 3 = SAE 6
*** Port 3 = 1/4” BSPP
J
C
B
H
G
A
D
E
F
1
2
3
I
Only for C-12-3*
Two holes ?10.3(0.04),
(82,5) 3.250 apart
Note
Fatigue rated aluminum housings
are intended for applications
up to 210 bar (3000 psi)
with harsh duty cycles. These
housings have been fatigue
rated to NFPA standards to one
million cycles.
C-**-3/3S
Aluminum housings
(NFPA fatigue rated)
.B
J
J-8.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
 Ports Part
Housing 1, 2 & 3 Number Code
C–8–3 1/4” BSPP 02–160743 (S)2G
 3/8” BSPP 02–160744 (S)3G
 SAE 4 02–160745 (S)4T
 SAE 6 02–160746 (S)6T
C–10–3 1/4” BSPP 02–175127 (S)2G
 3/8” BSPP 02–175128 (S)3G
 SAE 6 02–175124 (S)6T
 SAE 8 02–175125 (S)8T
C–12–3 1/2” BSPP 02–169815 (S)4G
 3/4” BSPP 02–169814 (S)6G
 SAE 10 02–161070 (S)10T
 SAE 12 02–169816 (S)12T
C–16–3 1/2” BSPP 02–175131 (S)4G
 3/4” BSPP 02–175132 (S)6G
 SAE 10 02–175129 (S)10T
 SAE 12 02–175130 (S)12T
C–20–3 3/4” BSPP 02–175135 (S)6G
 1” BSPP 02–175136 (S)8G
 SAE 12 02–175133 (S)12T
 SAE 16 02–175134 (S)16T
Notes
BSPP porting is designated by
‘‘G” in the model code SAE
porting is designated by ‘‘T’’ in
the model code.
Notes
Fatigue rated steel
housings are intended for applications
up to 350 bar (5000 psi)
with harsh duty cycles. These
housings have been fatigue
rated to NFPA standards to one
million cycles.
Dimensions A B C D E F G H I J K Mass
mm (inch) kg (lb)
C-8-3* 63,5 31,8 66,7 38,1 19,1 15,5 54,0 3,3 56,9 7,1 29,8 0,9
 (2.50) (1.25) (2.63) (1.50) (0.75) (0.61) (2.13) (0.13) (2.24) (0.28) (1.17) (2.15)
C-10-3 76,2 38,1 76,2 44,4 22,4 19,1 63,5 9,7 57,0 7,1 35,1 1,7
 (3.00) (1.50) (3.00) (1.75) (0.88) (0.75) (2.50) (0.38) (2.24) (0.28) (1.38) (3.75)
C-12-3 88,9 44,4 101,6 50,8 25,4 28,7 88,9 12,7 63,5 10,3 51,5 3,0
 (3.50) (1.75) (4.00) (2.00) (1.00) (1.13) (3.50) (0.50) (2.50) (0.40) (2.03) (6.75)
C-16-3 101,6 50,8 107,9 50,8 25,4 25,4 88,9 12,7 76,2 10,3 54,0 3,4
 (4.00) (2.00) (4.25) (2.00) (1.00) (1.00) (3.50) (0.50) (3.00) (0.40) (2.13) (7.70)
C-20-3 114,3 57,1 139,7 63,5 31,8 31,8 114,3 19,0 76,2 11,9 72,2 6,4
 (4.50) (2.25) (5.50) (2.50) (1.25) (1.25) (4.50) (0.75) (3.00) (0.47) (2.84) (14.30)
* 8 Series housings utilize a slot instead of mounting holes.
I
B
D
E
H J?
F
G
1
3
2
C
A
K
C-**-3
Steel housings
(NFPA fatigue rated)
J
 EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013 J-9.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
I
I
1
C-16 & -20
B
D
H
J
F
G
F
H
G J
L?
K
L?
C
B
D
C-10 & -12
E
2
3 3
2
1
C
A A
K
E
 Part
Housing Ports 1 & 2 Port 3 Number Code
C–10–3S 3/8” BSPP 1/4” BSPP 02–163313 (S)3G
 1/2” BSPP 1/4” BSPP 02–163324 (S)4G
 SAE 6 SAE 6 02–171961 (S)6T
 SAE 8 SAE 6 02–163322 (S)8T
 SAE 10 SAE 6 02–163323 (S)10T
C–12–3S 1/2” BSPP 3/8” BSPP 02–160994 (S)4G
 3/4” BSPP 3/8” BSPP 02–160995 (S)6G
 SAE 10 SAE 6 02–160996 (S)10T
 SAE 12 SAE 6 02–160997 (S)12T
C–16–3S 1/2” BSPP 3/8” BSPP 02–175118 (S)4G
 3/4” BSPP 3/8” BSPP 02–175119 (S)6G
 SAE 10 SAE 6 02–175116 (S)10T
 SAE 12 SAE 6 02–175117 (S)12T
C–20–3S 3/4” BSPP 3/8” BSPP 02–175122 (S)6G
 1” BSPP 3/8” BSPP 02–175123 (S)8G
 SAE 12 SAE 6 02–175120 (S)12T
 SAE 16 SAE 6 02–175121 (S)16T
Notes
BSPP porting is designated by
‘‘G” in the model code SAE
porting is designated by ‘‘T’’ in
the model code.
Fatigue rated steel housings
are intended for applications
up to 350 bar (5000 psi) with
harsh duty cycles. These housings
have been fatigue rated to
NFPA standards to one million
cycles.
Dimensions A B C D E F G H I J K L? Mass
mm (inch) kg (lb)
C-10-3S 63,5 31,8 76,2 41,3 20,7 36,6 53,8 11,2 53,8 9,7 19,8 8,7 1,08
 (2.50) (1.25) (3.00) (1.63) (0.82) (1.44) (2.12) (0.44) (2.12) (0.38) (0.78) (0.34) (2.40)
C-12-3S 88,9 44,5 101,6 50,8 25,4 41,9 76,2 31,7 57,1 12,7 23,1 10,3 2,4
 (3.50) (1.75) (4.00) (2.00) (1.00) (1.65) (3.00) (1.25) (2.25) (0.50) (0.91) (0.40) (5.40)
C-16-3S 88,9 41,2 88,9 50,8 25,4 38,1 69,8 12,7 63,5 19,0 17,4 10,3 2,6
 (3.50) (1.62) (3.50) (2.00) (1.00) (1.50) (2.75) (0.50) (2.50) (0.75) (0.68) (0.40) (5.90)
C-20-3S 101,6 44,4 114,3 63,5 31,7 50,8 88,9 12,7 76,2 25,4 20,6 10,3 4,6
 (4.00) (1.75) (4.50) (2.50) (1.25) (2.00) (3.50) (0.50) (3.00) (1.00) (0.81) (0.40) (10.24)
C-**-3S
Steel housings
(NFPA fatigue rated)
J
J-10.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
 2
F A
(2 places)
J
Port
E
C
 B
"2"
D
G
C
G
Port 2
?H
(2 places)
F A
(2 places)
?H
(2 places)
Housing Number
 Aluminum Steel
Code Port Size EPV16-A EPV16-B EPV16-A EPV16-B
4G 1/2” BSPP 02-185448 02-166607 02-180050 02-165500
6G 3/4” BSPP 02-185449 02-161582 02-180051 02-164931
10H SAE 10 02-185446 02-170238 – –
12H SAE 12 02-185447 02-166609 – –
10T SAE 10 – – 02-180048 02-161983
12T SAE 12 – – 02-180049 02-161982
5C CETOP5 (NFPA D05) interface (Requires steel housing)
Model A B C D E F G ?H J Mass kg (lb)
mm (inch) Alum Steel
Modified C-16-3S 76,2 30,2 79,2 100,8 38,1 12,7 21,4 8,7 60,4 2,0 6,0
body (3.00) (1.19) (3.12) (3.97) (1.50) (0.50) (0.84) (0.34) (2.38) (4.50) (13.5)
For use with EPV16-A or B only.
Modified housing for
use with EPV16-A.
Modified housing for
use with EPV16-B.
C-16-3S
Steel (NFPA fatigue rated)
Special housings for EPV16 only
J
 EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013 J-11.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
 Ports 1, Part
Housing 2, 3 & 4 Number Code
C–10–4 3/8” BSPP 02-179705 (A)3B
 SAE 6 566161 (A)6T
C–12–4 SAE10 6030517-001 (A)10T
C–16–4 3/4” BSPP 02-175468 (A)6B
 SAE 12 566411 (A)12T
C–20–4 1” BSPP 02-175469 (A)8B
 SAE 16 566412 (A)16T
Housing (FDC*-**only)
C–10–4 3/8” BSPP 02-175467 (A)3B
 SAE 6 566234 (A)6T
C–16–4 3/4” BSPP 02-175468 (A)6B
 SAE 12 566200 (A)12T
Notes
BSPP porting is designated by
‘‘B” in the model code SAE
porting is designated by ‘‘T’’ in
the model code.
Note
Light duty aluminum housings
are intended for applications up
to 210 bar (3000 psi) with light
to moderate duty cycles.
1
B
J
A
C
H
G
D
F
E
2
3
4
K
I
B
J
A
C
H
G
D
F
E
2
3
4
K
I
(FDC*-**only)
Note
For C-10-4 housings for VCB
valves see page J-25.
Dimensions A B C D E F G H I J K Mass
mm (inch) kg (lb)
C-10-4 63,5 31,7 82,5 31,7 15,8 3,1 34,9 19,0 7,1 9,5 50,8 0,3
 (2.50) (1.25) (3.25) (1.25) (0.62) (0.12) (1.37) (0.75) (0.28) (0.37) (2.00) (0.72)
C-16-4 106,6 50,8 133,3 50,8 25,4 3,8 53,9 25,4 8,7 22,2 82,5 1,4
 (4.00) (2.00) (5.25) (2.00) (1.00) (0.15) (2.12) (1.00) (0.34) (0.87) (3.25) (3.24)
C-20-4 114,3 57,1 117,8 63,5 31,7 4,0 72,1 31,7 10,4 25,4 113,5 2,6
 (4.50) (2.25) (7.00) (2.50) (1.25) (0.16) (2.84) (1.25) (0.41) (1.00) (4.47) (5.76)
C-**-4
Aluminum housings
(Light duty)
.B
J
J-12.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Dimensions A B C D E F G H I J K Mass
mm (inch) kg (lb)
C-8-4 63,5 31,8 82,6 38,1 19,1 3,2 29,8 15,5 7,1 9,6 44,0 0,8
 (2.50) (1.25) (3.25) (1.50) (0.75) (0.13) (1.17) (0.61) (0.28) (0.38) (1.73) (1.76)
C-10-4 76,2 38,1 88,9 50,8 25,4 9,5 36,6 20,8 7,1 12,7 52,5 0,9
 (3.00) (1.50) (3.50) (2.00) (1.00) (0.37) (1.44) (0.82) (0.28) (0.50) (2.07) (2.00)
C-12-4 88,9 44,5 127,0 63,5 31,8 10,3 51,6 28,7 8,7 25,4 74,4 1,6
 (3.50) (1.75) (5.00) (2.50) (1.25) (0.40) (2.03) (1.13) (0.34) (1.00) (2.93) (3.6)
C-16-4 114,3 60,3 139,7 63,5 31,8 10,3 57,0 28,4 8,7 25,4 85,5 2,4
 (4.50) (2.37) (5.50) (2.50) (1.25) (0.40) (2.24) (1.12) (0.34) (1.00) (3.37) (5.29)
C-20-4 127,0 63,5 177,8 82,5 41,3 10,3 76,5 36,0 8,7 19,0 117,8 4,7
 (5.00) (2.50) (7.00) (3.25) (1.63) (0.40) (3.01) (1.42) (0.34) (0.75) (4.63) (10.5)
B
J
A
C
H
D
F
E
1
2
3
4
I
K
G
F
B
J
A
C
H
G
D
F
E
2
3
4
I
K
( DC*–** only)
 Ports 1, Part
Housing 2, 3 & 4 Number Code
C–8–4 1/4” BSPP 02–160747 (A)2G
 3/8” BSPP 02–160748 (A)3G
 SAE 4 02–160749 (A)4T
 SAE 6 02–160750 (A)6T
C–10–4 1/4” BSPP 876709 (A)2G
 3/8” BSPP 876715 (A)3G
 SAE 6 876708 (A)6H
 SAE 8 876713 (A)8H
C–12–4 3/4” BSPP 5986432-001 (A)6G
 SAE 10 5986434-001 (A)10T
 SAE 12 5986436-001 (A)12T
C–16–4 1/2” BSPP 876728 (A)4G
 3/4” BSPP 876730 (A)6G
 SAE 10 876279 (A)10H
 SAE 12 876731 (A)12H
C–20–4 3/4” BSPP 876744 (A)6G
 1” BSPP 876746 (A)8G
 SAE 12 876745 (A)12H
 SAE 16 876747 (A)16H
Housing (FDC*-**only)
C–10–4 1/4” BSPP 02–185804 (A)2G
 3/8” BSPP 02–185805 (A)3G
 SAE 6 02–185802 (A)6H
 SAE 8 02–185803 (A)8H
Notes
BSPP porting is designated by
‘‘G” in the model code SAE
porting is designated by either
“H” in the model code.
Fatigue rated aluminum housings
are intended for applications
up to 210 bar (3000 psi)
with harsh duty cycles. These
housings have been fatigue
rated to NFPA standards to one
million cycles.
For C-10-4 and C-12-4 housings
for VCB valves see pages J-25
& J-27 respectively.
C-**-4
Aluminum housings
(NFPA fatigue rated)
J
 EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013 J-13.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Dimensions A B C D E F G H I J K L Mass
mm (inch) kg (lb)
C-8-4* 63,5 31,8 82,6 38,1 19,1 15,5 44,0 3,3 57,1 7,1 73,0 29,8 1,2
 (2.50) (1.25) (3.25) (1.50) (0.75) (0.61) (1.73) (0.13) (2.25) (0.28) (2.88) (1.17) (2.70)
C-10-4 76,2 38,1 88,9 44,4 22,2 19,1 50,8 9,5 57,1 7,1 76,2 34,9 1,9
 (3.00) (1.50) (3.50) (1.75) (0.87) (0.75) (2.00) (0.37) (2.25) (0.28) (3.00) (1.37) (4.35)
C-16-4 101,6 50,8 139,7 50,8 25,4 25,4 82,5 12,7 76,2 10,3 120,6 53,9 5,6
 (4.00) (2.00) (5.50) (2.00) (1.00) (1.00) (3.25) (0.50) (3.00) (0.40) (4.75) (2.12) (12.40)
C-20-4 114,3 57,1 177,8 63,5 31,8 31,8 113,5 19,1 76,2 11,8 152,4 72,1 8,2
 (4.50) (2.25) (7.00) (2.50) (1.25) (1.25) (4.47) (0.75) (3.00) (0.47) (6.00) (2.84) (18.20)
* 8 Series housings utilize slot instead of mounting holes.
 Ports 1, Part
Housing 2, 3 & 4 Number Code
C–8–4 1/4” BSPP 02–160751 (S)2G
 3/8” BSPP 02–160752 (S)3G
 SAE 4 02–160753 (S)4T
 SAE 6 02–160754 (S)6T
C–10–4 1/4” BSPP 02–175139 (S)2G
 3/8” BSPP 02–175140 (S)3G
 SAE 6 02–175137 (S)6T
 SAE 8 02–175138 (S)8T
C–16–4 1/2” BSPP 02–175143 (S)4G
 3/4” BSPP 02–175144 (S)6G
 SAE 10 02–175141 (S)10T
 SAE 12 02–175142 (S)12T
C–20–4 1/2” BSPP 02–175147 (S)4G
 3/4” BSPP 02–175148 (S)6G
 SAE 12 02–175145 (S)12T
 SAE 16 02–175146 (S)16T
Notes
BSPP porting is designated by
‘‘G” in the model code SAE
porting is designated by ‘‘T’’ in
the model code 8 series utilize
slot in place of mounting hole.
Fatigue rated steel housings
are intended for applications
up to 350 bar (5000 psi) with
harsh duty cycles. These housings
have been fatigue rated to
NFPA standards to one million
cycles.
For C-10-4 and C-12-4 housings
for VCB valves see pages J-24
& J-27 respectively.
I
B
D
E
H
J?
K
F
G
L
1
2
3
4
A
C
C-**-4
Steel housings
(NFPA fatigue rated)
J
J-14.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Dimensions A B C D E F G H DIA. I J K L M N
mm (inch)
C-12-5S 100.8 50.4 113.5 50 25 12.3 34.1 54 8.7 76.1 25 50.4 88.5 16.7
 (3.97) (1.99) (4.47) (1.97) (0.99) (0.49) (1.34) (2.13) (0.34) (3.00) (0.99) (1.99) (3.49) (0.66)
C-16-5S 113.5 56.8 126.2 62.7 31.4 9.5 36.1 58.7 8.7 85.7 31.4 56.8 104.8 16.9
 (4.47) (2.24) (4.97) (2.47) (1.24) (0.38) (1.42) (2.31) (0.34) (3.38) (1.24) (2.24) (4.13) (0.66)
C-20-5S 126.2 63.1 138.9 75.4 37.7 12.7 37.6 62.3 10.3 87.4 37.7 63.1 114.3 16.8
 (4.97) (2.49) (5.47) (2.97) (1.49) (0.50) (1.48) (2.45) (0.40) (3.44) (1.09) (2.49) (4.50) (0.66)
 Aluminum Steel
 Ports Part Part
Housing 2,3,4 Port 1,5 Number Code Number Code
C–12–5S SAE 10 SAE 4 4998820-001 (A)10T 4998821-001 (S)10T
 SAE 12 SAE 4 4998820-002 (A)12T 4998821-002 (S)12T
 1/2” BSPP 1/4” BSPP 4998820-003 (A)04G 4998821-003 (S)04G
 3/4” BSPP 1/4” BSPP 4998820-004 (A)06G 4998821-004 (S)06G
C–16–5S SAE 12 SAE 4 4994880-001 (A)12T 4994881-001 (S)12T
 SAE 16 SAE 4 4994880-002 (A)16T 4994881-002 (S)16T
 3/4” BSPP 1/4” BSPP 4994880-003 (A)06G 4994881-003 (S)06G
 1” BSPP 1/4” BSPP 4994880-004 (A)08G 4994881-004 (S)08G
C–20–5S SAE 12 SAE 4 4998822-001 (A)12T 4998823-001 (S)12T
 SAE 16 SAE 4 4998822-002 (A)16T 4998823-002 (S)16T
 3/4” BSPP 1/4” BSPP 4998822-003 (A)06G 4998823-003 (S)06G
 1” BSPP 1/4” BSPP 4998822-004 (A)08G 4998823-004 (S)08G
Notes
BSPP porting is designated by
‘‘G” in the model code SAE porting
is designated by ‘‘T’’ in the
model code.
Fatigue rated aluminum and steel
housings are intended for applications
up to 210 bar (3000 psi) and
350 bar (5000 psi) respectively
with harsh duty cycles. These
housings have been fatigue rated
to NFPA standards to one million
cycles.
D
E
B
F
?I
2
4
K
L
M
A
C
J
G
3
5
H
N
C-**-5S
Steel and aluminum housings
(NFPA fatigue rated)
.B
J
 EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013 J-15.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
 Minimum Minimum Full
SAE Size Thread Size Spotface ? Thd Depth
4 0.437”-20 UNF-2B 21,1 (0.82) 11,5 (0.45)
6 0.563”-18 UNF-2B 24,7 (0.96) 12,7 (0.50)
8 0.750”-16 UNF-2B 30,2 (1.18) 14,2 (0.56)
10 0.875”-14 UNF-2B 34,2 (1.34) 16,6 (0.65)
12 1.062”-12 UN-2B 41,3 (1.62) 19,0 (0.75)
16 1.312”-12 UN-2B 48,6 (1.91) 19,0 (0.75)
 Minimum Minimum Full
BSPP Thread Size Spotface ? Thd Depth
1/4” 24 (0.94) 12,2 (0.48)
3/8” 27 (1.06) 12,2 (0.48)
1/2” 33 (1.29) 15,0 (0.59)
3/4” 42 (1.65) 16,3 (0.64)
1” 47 (1.85) 19,1 (0.75)
Min. full
thread depth
Spotface ? 0,8 (0.03)
Port Dimensions
Key dimensions in all standard housings
J
J-30.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-**-2 Cavity Plugs
Size Assy. No. Seal Kit
To fit Buna-N
cavity A B C ?D Viton?
C-4-2 0.4375’’-20 5,1 21.8 8,61/8,66 5986597-001 9900174-000
 (0.20) (0.86) (0.339/0.341) 9900175-000
C-8-2 0.750’’-16 9,1 27.4 12,6/12,5 02-171585 02-165877
 (0.36) (1.08) (0.498/0.496) 02-165875
C-10-2 0.875’’-14 7,9 31,7 15,8/15,7 565814 565806
 (0.31) (1.25) (0.62/0.62) 889627
C-12-2 1.062’’-12 18,7 44,5 23,7/23,7 02-171710 02-165889
 (0.74) (1.75) (.936/.934) 02-165888
C-16-2 1.312’’-12 12,7 44.7 28,5/28,5 565816 889631
 (0.50) (1.76) (1.12/1.12) 889635
C-20-2 1.625’’-12 13,5 57,2 36,4/36,4 566440 889639
 (0.53) (2.25) (1.43/1.43) 889643
Size Assy. No. Seal Kit
To fit Buna-N
cavity A B C D E Viton?
C-4-3 0.4375’’-20 5,1 37,3 7,82/7,87 8,61/8,66 5986599-001 9900176-000
 (0.20) (1.47) (0.308/0.310) (0.339/0.341) 9900177-000
C-8-3 0.750’’-16 9,1 40,7 14,2/14,0 15,8 02-171708 02-160755
 (0.36) (1.60) (0.56/0.55) (0.623/0.621) 02-160765
C-10-3S 0.875’’-14 7,9 74,2 17,4/17,4 19,0/18,9 566436 02-173019
 (0.30) (1.86) (0.68/0.68) (0.74/0.74) 02-173020
C-10-3 46,0 15,8/15,7 17,4/17,3 565815 889624
 (1.81) (0.62/0.62) (0.68/0.68) 889628
C-12-3S 1.062’’-12 18,7 57,7 22,1/22, 1 23,7/23,7 02-171711 02-180095
 (0.74) (2.27) (0.874/0.872) (0.936/0.934) 02-165887
C-12-3 67,1 – – 02-171712 02-165872
 (2.64) 02-165886
C-16-3S 1.312’’-12 12,7 55,6 25,3/25,3 28,5/28,5 566438 889633
 (0.50) (2.18) (0.99/0.99) (1.2/1.2) 889637
C-16-3 73,1 26,9/26,9 28,5/28,5 566437 889632
 (2,87) (1.06/1.06) (1.2/1.2) 889636
C-20-3S 1.625’’-12 13,5 76.2 33,3/33,2 36,4/36,4 566442 02-113153
 (0.53) (3.0) (1.31/1.30) (1.43/1.43) 02-112969
C-20-3 98.5 33,3/33,2 36,4/36,4 566441 889640
 (3.87) (1.31/1.30) (1.43/1.43) 889644
D
E
1
2
3
B
A Thread
C
Note
To block flow from
between the ports in any
unused standard cavity, in a
housing or manifold. Order
cavity plugs by part number.
Note
C-16-2 cavity plug can be
used to block port 3 of
C-16-3
Standard Plugs
C-**-3(S) Cavity Plugs
Cavity Plugs
.B
J
 EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013 J-31.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
To Fit Assy
Cavity Size A B C D ?E ?F ?G No.
C-8-4 0.750’’-16 22,2 (0.87) hex. 8,6 54,6 12,6 14,2 15,8 02-171709
 Torque 35-40 (0.34) (2,15) (0.49) (0.55) (0.62)
 Nm(25-30 lbf ft)
C-10-4(U) 0.875’’-14 25,4 (1.0) hex. 7,9 61,9 15,8/15,7 17,4/17,3 19,0/18,9 566244
 Torque 47-54 (0.31) (2.43) (0.62/0.62) (0.68/0.68) (0.74/0.74)
 Nm (35-40 lbf ft)
C-16-4 1.312’’-12 38,1 (1.50) hex. 12,7 101.6 25,3/25,3 26,9/26,9 28,5/28,5 566443
 Torque 109-122 (0.50) (4.00) (0.99/0.99) (1.06/1.05) (1.12/1.12)
 Nm (80-90 lbf ft)
C-20-4 1.625’’-12 47,6 (1.87) hex. 13,5 139,7 31,7/31,6 33,3/33,2 36,4/36,4 566443
 Torque 129-156 (0.53) (5.50) (1.24/1.24) (1.31/1.30) (1.43/1.43)
 Nm (95-115 lbf ft)
C-**-4 Cavity Plugs
IMPORTANT
The cartridges
listed are complete
with seals compatible
with antiwear hydraulic oil.
If cartridges are to be compatible
with antiwear
and phosphate ester, order
cartridges by part number
plus the appropriate Viton
seal kit as listed in Spare
parts. Before using the
cartridge, change the seals
to Viton.
?
D
C
2
3
4
1
B
A
Thread
E
F
Special Purpose
Cavity Plugs
Functional Symbols
To Fit Cavity Size Assy. No. Seal Kit
C-10-2 02-186758 566806 (Buna-N)
 889627 (Viton?
)
Screen fitted on cartridge, intended direction of flow is from port 2 to 1 only. Maximum rated flow is
76 L/min (20 USgpm), maximum operating pressure is 350 bar (5000 psi)
To Fit Cavity Size Assy. No. Seal Kit
C-8-3 02-186664 02-160755 (Buna-N)
 02-160756 (Viton?
)
C-10-3S 02-185257 02-173019 (Buna-N)
 02-173020 (Viton?
)
To Fit Cavity Size Assy. No. Seal Kit
C-10-3 02-161831 889624 (Buna-N)
 889628 (Viton?
)
To Fit Cavity Size Assy. No. Seal Kit
C-8-4 02-179151 02-160757 (Buna-N)
 02-160758 (Viton?
)
Filter cartridge plugs
Special 3 way cavity plugs
Special 4 way cavity plugs
Cavity Plugs
J
J-40.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Features and Benefits
? Integrated disposable
element which is
screwed into the manifold
port for last chance
filtration
? Catches particles in a
variety of sizes (20, 50,
70 microns)
? Universally adaptable
to all sizes of standard
manifolds
Filter and Element
Model Code
Sample model code
ECF1SB1J3CB25
Design?Specifications
Rated flow 19 L/min (5 USgpm)
Fluid compatibility Compatible with all petroleum, oil based and synthetic fluids.
 Not rated for use with fluoro-rubber or ethylene propylene seals.
Temp range -30°C to +121°C (-22°F to 250°F)
Pressure rating 10 bar (145 psi)
Cavity BC20-S3
Material Head Aluminum
 Bowl Aluminum
Dry weight 0.11 kg (0.25 lbs)
ECF 1 SB 1 J 3 C * **
1 2 3 4 5 6 7 8 9
1 Filter Series - ECF
2 Element collapse rating
1 – 250 PSI low collapse
3 Port options
SB – 1.312-12 UN SAE-16
straight thread 1” O.D.
tube
4 Valve options
1 – Non-Bypass
(Screw directly into cavity)
5 Indicator options
J – No indicator
6 Assembly length
3 – 80.2mm (3.157”)
7 Element construction
C – Standard construction
8 Seal material
B – Buna-N
V – Viton-A
9 Fluid cleanliness
 Fluid Cleanliness Element
Code Rating Construction
15 20/18/15 C-Pak
25 Wirescreen
149 Wirescreen
ECF - Pressure Filters
Flows to 19 L/min (5 USgpm) ? Pressures to 207 bar (3000 psi)
J
 EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013 J-41.A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
3.157 2.634
?0.998
1 5/16 - 12UN-2A IN.
1.5
HEX
OUTLET
?0.75 P ilot Drill
?1.003±0.002
?1.234±0.002