矿用屏蔽控制电缆(MKVVP电缆)、、
矿用屏蔽控制电缆(MKVVP电缆)、、
产品价格:¥0(人民币)
  • 规格:完善
  • 发货地:大城
  • 品牌:
  • 最小起订量:1米
  • 诚信商家
    会员级别:标准会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:天津市电缆总厂第一分厂

    联系人:毕国锋(先生)

    联系手机:

    固定电话:

    企业邮箱:992231530@qq.com

    联系地址:河北省廊坊市大城县毕演马工业区

    邮编:65900

    联系我时,请说是在线缆网上看到的,谢谢!

    商品详情
       
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV二芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV三芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV四芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 4-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV五芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/kV 5-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV3+2-core Fire Resistance Power Cable
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、单芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、二芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、三芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、四芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、五芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV二芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV三芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV四芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 4-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV五芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/kV 5-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV3+2-core Fire Resistance Power Cable
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、单芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、二芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、三芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、四芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、五芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV二芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV三芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV四芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 4-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV五芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/kV 5-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV3+2-core Fire Resistance Power Cable
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、单芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、二芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、三芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、四芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、五芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV二芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV三芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV四芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 4-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV五芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/kV 5-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV 3+2-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV3+2-core Fire Resistance Power Cable
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、4+1芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV4+1-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、单芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV Single-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、二芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 2-core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、三芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、四芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 4-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、五芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 5-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+1芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+1-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      ·0.6/1kV、3+2芯钢带铠装耐火电力电缆(NH(B)-VV22、NHA-VV22、NH(B)-YJV22 、 NHA-YJV22)
      0.6/1kV 3+2-Core Steel Tape Armoured Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.

      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      矿用屏蔽控制电缆(MKVVP电缆)、、
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.

      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.

      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.

      本产品按GB12706《额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆》和GB12666《电线电缆燃烧实验方法》标准生产,同时还可根据用户需要按国际电工委员会推荐的IEC标准、英国BS标准、德国DIN标准、美国ICEA标准及日本JIS标准生产。
      The product is manufactured according to the standard of GB12706 and GB12666 or IEC,BS,DIN,ICEA,and JIS upon request.
      适用范围
      本产品适用于工频额定电压0.6/1kV及以下配电线路或工业装置中有耐火要求的固定敷设场所使用。
      The product is suitable for use in power distribution lines or fixed installations with rated power-frequency voltage up to and including 0.6/1kV.

      使用特性
      ·工频额定电压U0/U:0.6/1kV。
      Rated power-frequency voltage U0/U:0.6/1kV.
      ·电缆导体的最高允许长期工作温度(PVC/XLPE):70℃/90℃.
      Max.permissible continuous operating temperature of conductor (PVC/XLPE): 70℃/90℃
      ·短路时(最长持续时间不超过5s)电缆导体最高允许温度
      PVC:导体截面≤300mm2-160℃
      导体截面>300mm2-140℃
      XLPE:250℃
      Max.short-circuit temperature of the conductor shall not exceed(5s maxiumduration):
      PVC:cross-section of conductor≤300mm2-160℃
      cross-section of conductor>300mm2-140℃
      XLPE:250℃
      ·电缆敷设时环境温度应不低于0℃
      The ambient temperature under installation should not below 0℃
      ·电缆的弯曲半径:多芯电缆不小于电缆外径15倍,单芯电缆不小于电缆外径20倍。
      The bending radius of a single-core cable should not less than 20 times of the cable diameter.
      The bending radius of multicore-cable should not less than 15 times of the cable diameter.
       
      电缆的型号Type of cable
       
       
      结构尺寸及主要技术参数Construction and main technical data
      ·0.6/1kV单芯耐火电力电缆(NH(B)-VV NHA-VV NH(B)-YJV NHA-YJV)
      0.6/1kV Single-core Fire Resistance Power Cable
       
      注:*表示导体为紧压圆形线芯。
      Where:*=Compact circular stranded conductor.
      公司全称:天津市电缆总厂橡塑电缆厂

      生产厂区:河北省大城县刘演马工业区
        
      电  话 :0316-3267066 

      手  机 :18231608566

      传  真 :0316-3267058

      组织机构代码证:10951028-2

      CCC认 证 编 号:2003010104099693

      营业执照注册号:131025100000860

      税 务 登 记 证:131025109510282

      开  户  银  行:河北省大城县刘固献农村信用合作社

      汇  款  帐  号:91608040020110005316


       

    在线询盘/留言
  • 0571-87774297